Wyze outdoor cameras are cost-effective yet deliver standard footage, precisely capturing every detail. Security cameras like the Wyze Cam Outdoor require base stations for installation and connectivity. The base functions as a hub that connects your Wyze security camera to the Internet. In this post, we’ll cover how you can install Wyze Outdoor Camera synchronizing with the base station and integrate the smartphone app in easy-to-follow steps.
Table of Contents
How To Install Wyze Cam Outdoor (Step-by-Step)
The Wyze Cam Outdoor comes with the necessary equipment in the box to mount the camera on the wall. In addition, you will need the following things:
- Screwdriver
- Drill with a drill bit
- Smartphone
- Ladder
Now, go through the following steps to know the installation process of Wyze Outdoor Camera:
Step 1: Wyze Base Station Setup
Plug the base station into the router with the provided ethernet cable. Then, connect and plug in the power adapter to turn on the base station. Wait for a while until the indicator shows a solid blue light to ensure proper network connectivity.
Step 2: Wyze Cam Outdoor App Integration
Your mobile device must be connected to the same network. Download the Wyze camera app from the iOS App Store or Google Play Store. Then, create your Wyze account via the mobile app. Click on the three dots at the top right corner and go to ‘add a new device.’
Step 3: Pair the Cam with the Base Station
Make sure the camera is fully charged (check the solid red light at the back of the camera). Keep the camera within six feet of the base station to complete the setup. You can simply press the sync button on the base station for proper integration or use the camera app and follow instructions accordingly. Now, wait for a while until the base station and the camera get paired.
Step 4: Mounting Wyze Cam Outdoor
While installing the Wyze Cam outdoors, try to avoid direct sunlight and high-traffic areas like roads for more accurate and detailed results. We recommend putting the camera from 7 to 10 feet above the ground. While mounting, you may need to drill wall anchors. While drilling, be careful not to damage any internal wiring and pipes. Follow the points below to mount the camera:
-Drill into the wall and install a wall screw partially.
-Adjust the camera’s mounting base with the screw and tighten it with the wall.
-Place the camera on the mounting base and adjust the stands pointing to your desired direction.
Wyze Outdoor Camera Setup Without Base Station?
The Wyze outdoor camera can’t be installed without the base station. To complete the setup and connectivity, you must use the Wyze Base Station. One base station can support up to 4 Wyze Cam Outdoors simultaneously.
How To Mount Wyze Cam V2?
Mounting Wyze Cam V2 follows the easy steps below:
- Step 1: Drill into your desired location.
- Step 2: Then, adjust the camera’s mounting base with the screws and tighten it to the surface.
- Step 3: Set the camera with the mounting base and adjust the stands pointing to your desired direction.
See Also: Mounting Cameras To Soffit
How To Reset Wyze Outdoor Camera?
You cannot factory reset a Wyze Cam Outdoor. However, you can power cycle it by flipping the switch on the back of the device. Turning it off and on again won’t disconnect it from your account or reset it to the original settings, but it can help with troubleshooting.
Here are the steps on how to power cycle Wyze Cam Outdoor:
- Step 1: Flip the power switch to the Off position on the back of the camera.
- Step 2: Unplug the cord from the camera if connected to a power source. Then, wait 30 seconds.
- Step 3: Flip the camera’s power switch back to the on position.
Once the camera is powered back on, it will start up and connect to your Wi-Fi network. You may need to re-add the camera to your Wyze app.
How To Install Wyze Cam Floodlight?
Before proceeding, check out local rules and regulations regarding mounting a Floodlight camera outside. To install Wyze Cam Floodlight, you need a junction box and ensure the camera is within the Wi-Fi signal range. Let’s see how to install Wyze Cam Floodlight:
Step 1: In the Wyze app, tap the + sign in the upper left-hand corner, then tap Add Device > Cameras > Wyze Cam Floodlight. Read the High Voltage warning before tapping “Got It”! Tap Check Wi-Fi Signal Strength to make sure the installation location has a strong Wi-Fi signal.
Step 2: At your electrical panel, turn off the circuit breaker for the junction box where you will be installing the Wyze Cam Floodlight.
Step 3: Mount the floodlight. If you are replacing an existing floodlight, carefully remove the old floodlight. To securely mount the Wyze Cam Floodlight,
Attach the mounting bracket to the junction box using the two medium bracket screws.
Next, connect the ground wire to the mounting bracket by utilizing the short ground wire screw.
Connect the Wyze Cam Floodlight’s black and white wires to the junction box’s corresponding wires using wire nuts.
Carefully hang the Wyze Cam Floodlight from the mounting bracket.
Step 4: Set up the Wyze Cam Floodlight. In the Wyze app, tap Start Setup and follow the on-screen instructions to connect the Wyze Cam Floodlight to your Wi-Fi network. Once the Wyze Cam Floodlight is connected to your Wi-Fi network, you can adjust the camera settings and start using your Wyze Cam Floodlight.
Wyze Cam Outdoor Review: In a Nutshell
The Wyze Cam Outdoor is an affordable wireless outdoor security camera to secure your backyard, porch, and garage. Wyze Cam Outdoor is wireless, and you can easily install it by integrating it into the base station. The best part of this outdoor camera is it’s highly portable, so you can take it anywhere. The camera provides 1080p full-HD footage and clearer night vision with a 110-degree field view. Besides, it will promptly alert you when the camera sensor detects any motion. This Wyze cam supports cloud storage as well as micro-SD cards.
Final Words
As you’re at the end of this article, now you know how to install a Wyze outdoor camera. We agree installing the Wyze outdoor camera with the base station could be tricky. However, if you follow our easy steps, you can easily mount it on a wall or ceiling based on your convenience. Make sure that the battery of this wireless outdoor camera is fully charged and the base station is properly connected to the Wi-Fi.